PRV-9000 Operating Instructions
2. Select
Initial Setup
from the menu.
Use the joystick to highlight the option then press
ENTER
.
3. Confirm that
Basic
from the Initial Setup menu is highlighted.
Menu options appear to the right of the highlighted menu selection.
4. Select
Clock Setting
from the Basic Setup menu.
Use the joystick to move right, highlighting the Clock Setting option.
5. Highlight
Auto
from the Clock Setting submenu.
6. Press
ENTER
to select the function.
The following clock options are available from a pop-up screen. Move
the joystick to the left or right to change selections.
Channel to broadcast clock information
Time Zone selection
Daylight Savings Time (DST) observed
7. Set
Clock Set CH
to the channel number for PBS.
If leaving other settings to Auto causes the recorder to fail, manually,
move the joystick left/right to create a setting for the highlighted option.
Cable: turn ON the cable box and set to PBS
Digital Satellite Receiver: turn OFF the satellite receiver
8. Press
ENTER
after changing or confirm all settings.
The previous menu appears on screen.
9. Press
SETUP
to exit the Setup menu.
10. Press
STANDBY/ON
to change the recorder to the standby mode.
The AUTO CLOCK SET message appears in the display then changes
to the current time. If the clock fails to set, skip down to the next section
to manually set/change the clock.
11. Press
STANDBY/ON
again to power the recorder ON.
25
