PRV-9000 Operating Instructions
9.2.5 Navi
Mark
Within DISCNAVI, a thumbnail image of the content represents each title. The
default (0 seconds) setting captures the first recorded frame to create the
thumbnail. The standard capture point can be changed to a frame at 30
seconds or a frame at three minutes. If the recording session is shorter than
the capture point set with the Navi-Mark function, the capture defaults back to
0 seconds for this particular segment.
This option also determines where the program’s auto-name is taken from: at
one minute, three minutes or ten minutes. These settings correspond to the
thumbnail captures.
Thumbnail capture: 0 seconds – Auto-named at 1 minute
Thumbnail capture: 3 0 seconds – Auto-named at 3 minutes
Thumbnail capture: 3 minutes – Auto-named at 10 minutes
9.2.6 Start Rec on DVD-R
When recording to DVD-R media, press the
RECORD
button twice to begin
recording. Change the setting to Auto (press once) to record in the same
manner as with DVD-RW discs. Being as DVD-R media is write-once
technology, this feature allows you to verify that the proper type of media
(
write-once
or
multi-write
) is loaded for the current recording session.
Note: In the Auto (press once) setting, the recorder requires up to three seconds to
begin recording after the
REC
button is pressed.
9.2.7 Chapter
Interval
When recording in Video mode, chapter marks are added every three
minutes (default setting). Available settings are as follows:
every 3 minutes (default)
every 5 minutes
every 10 minutes
No Separation (function turned OFF)
9.2.8 Remote Control Set
If multiple Pioneer DVD recorders are within the same room, set the
Remote
Control Set
function for the number of recorders. So that each remote control
corresponds to it’s own recorder, set each recorder/remote control pair to a
different ID.
113
