Pioneer PDA-4001 Technical Manual Download Page 132

Page: 132 / 136

132

<Ver. 2.1>

KEY LOCK/UNLOCK

6.1 KEY LOCK/UNLOCK

6.1.1 Functions

To prevent tampering following installation, invoke “KEY LOCK” status to prevent use of “the main-body operation

panel” or “the remote control”. (RS232C commands are valid.)

If an attempt is made to use “the operation panel” or “the remote control”, the screen displays “KEY LOCK” at the top

right.

The system is factory-set to “KEY UNLOCK” to enable use of “the operation panel” and “the remote control”.

6.1.2 Setting method

KEY LOCK status can be set in two ways.

1) Operation panel of the main body (hidden button)

Press the KEY LOCK/UNLOCK button located in the opening between the STANDBY/ON button and INPUT button.

The button toggles between KEY LOCK and KEY UNLOCK settings.

2) RS232C commands

Activate RS232C adjustment mode and

send a <KLY> command to set for KEY LOCK status, or

send a <KLN> command to set for KEY UNLOCK.

Summary of Contents for PDA-4001









































































































































Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands

Pioneer PDA-4001, Technical Manual

Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands