Pioneer PDA-4001 Technical Manual Download Page 80

Page: 80 / 136

<Ver. 2.1>

4) Installation example

During installation, strictly observe the related operating conditions in “3.4 Special installation”.

Wire hanging

Attach wires to the bolts, as indicated in the figure.

To attach the wires to the ceiling, secure two wires at

two independent points for safety.

• To keep the plasma display main body from vibrating,

fix the main body by attaching wire to the bottom bolt.

• Use wires strong enough to withstand the total weight

(30.8 kg <31.6 kg> for the plasma display itself plus

3.3 kg for the PDP bracket).

< > shows the PDP-V401E.

Use the Special eye bolt only at the specified locations.

Improper use of Special eye bolts within the plasma display main body may

damage the display's blind nut.

Mounting standard metal fixtures (PDK-4005)

Caution

Special eye

bolt

Wire

PDP bracket

Do not attempt to correct tilt by applying downward load with the wires. Doing so may apply

excessive load upon and damage the wire connections and metal mounting fixture.

Caution

Summary of Contents for PDA-4001









































































































































Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands

Pioneer PDA-4001, Technical Manual

Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands