Pioneer PDA-4001 Technical Manual Download Page 55

Page: 55 / 136

<Ver. 2.1>

Installation of more than four units (Vertical connections)

This configuration is not recommended.

If you do use this configuration, make sure you observe the following conditions.

If the display must be operated at temperatures above the recommended levels, provide some form of air cooling that

keeps temperatures at the intake and exhaust sides of the A and B units within the specified range.

Clearance A to the wall

Ambient operating temperature

≥

300 mm

Use forced air-cooling until the intake and exhaust
temperature values are within the specified range (see the
following figure).

Special installation (Vertical connections)

10 mm

Outside atmosphere

+ 15 °C

Outside atmosphere

+5 °C; however, maxi-

mum temperature is

40 °C

Summary of Contents for PDA-4001









































































































































Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands

Pioneer PDA-4001, Technical Manual

Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands