Pioneer PDA-4001, Technical Manual

Page: 90 / 136

90
<Ver. 2.1>
Mounting standard metal fixtures (PDA-4001 • PDA-4002)
4.10 Infrared reduction filter: PDA-4001
Protective filter: PDA-4002
4.10.1 Specifications and features (Infrared reduction filter: PDA-4001)
1) Specifications
Transmittance .................... Transmittance of light in the visible spectrum - 70%
Outer dimensions .............. 908 (W)
×
73.3 (D)
×
908 (H) mm
Weight ................................ 3.6 kg (filter only)
34.4 kg <35.2 kg> (metal fixture with plasma display PDP-V401 <PDP-V401E>)
Material .............................. Acrylic
Packing dimensions .......... 1115 (W)
×
815 (D)
×
76 (H) mm
Packing weight .................. 7.6 kg
Accessories
Metal fixture ........................................................... 4 pcs
Hexagonal socket button head bolt (M8 x18) ........ 8 pcs
Washer ................................................................... 8 pcs
Decorative screw ................................................... 4 pcs
Filter ....................................................................... 1 pc
2) Features
Mounting the infrared reduction filter (PDA-4001) reduces emission of very weak infrared radiation produced by the
plasma display. In addition, its effect is verified using the equipment described below.
7
Pioneer's audio and visual equipment
¶
If the filter is not mounted:
Use of Pioneer AV equipment near the display when the filter is mounted may interfere with remote control
operation function.
¶
If the filter is mounted:
Check function under the following conditions:
The light-accepting section positioned opposite the PDP screen, and operation verified at a distance of 1 m or
greater from AV equipment.
7
Pioneer's infrared microphone
¶
If the filter is not mounted:
Noise may result, and normal operations may not be possible.
¶
If the filter is mounted:
Check function under the following conditions:
Verification at a distance of 2 m or greater from the front of the display.
Mice level: Hi
When a satellite is used, it is positioned at a distance of 2 m or greater from the front of the display.
7
Optic LAN
¶
If the filter is not mounted:
Normal operations may not be possible.
¶
If the filter is mounted:
Check function under the following conditions:
Operation at a distance of 2 m or greater from the front of the display.
2 m
2 m
2 m