Pioneer PDA-4001 Technical Manual Download Page 13

Page: 13 / 136

<Ver. 2.1>

3.2.3 Installation position

We recommend using the metal installation fixture made by Pioneer. When using a different fixture, use the M8 bolt

hole provided on this display to mount the fixture to the display. Remove the hole rivets on the back of the plasma

display, if necessary for the particular fixture. Tighten bolts with a force of 60 kg.cm or less. Overtightening may

damage the blind nuts.

• The following figure indicates mounting holes that can be used. (Use a coin or similar object to turn the cap to

remove it.)

Installation conditions

Use bolts that do not penetrate more than 13 to 20 mm from the mounting surface of the machine (see the above

side view). If the bolts used are longer than the above, they may damage the inside of the machine.

Do not block ventilating holes or blowholes in the rear of the machine.

Hot air is emitted from the ventilating holes.

Care must be taken not to weaken or soil the wall at the back of the machine with the hot air from the holes.

Glass is used in this machine. It must always be mounted on the straight face.

Mounting surface

Metal fixture

13 to 20 mm

Bolt

Summary of Contents for PDA-4001









































































































































Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands

Pioneer PDA-4001, Technical Manual

Search results

Summary of Contents for PDA-4001

Reviews:

Related manuals for PDA-4001

Brands by name

Popular brands