20
En
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN
jack to the
CONTROL OUT
jack of
another PIONEER component bearing the
Î
mark, you
can control the player as though it were a component in
a system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT
jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier
using an audio or video
cord
, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
AV CONNECTOR Connections
Using a commercially available 21-pin SCART cable,
connect the
AV CONNECTOR
jacks on the player to a
TV or monitor to achieve audio and video with a single
connection.
AV1 (RGB)-TV jack
• The video output signal of the
AV1 (RGB)-TV
jack
contains composite video, S-video, and RGB
information. After making physical connections to your
TV or monitor, select the most appropriate video
format in the
[Video Out]
setting in the Setup screen
Video
menu (
page 30
).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the
‘Specifications’
(
page 64
).
AV2 jack
• The video output signal of the
AV2
jack contains
composite video information. After making physical
connections to your TV or monitor, select the most
appropriate video format in the
[Video Out]
setting in
the Setup screen
Video
menu (
page 30
).
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the
‘Specifications’
(
page 64
).
CONTROL
OPT.
AUDIO OUT (2CH)
AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC
PAL
AUTO
OUT
IN
R
2
1
R
L
L
1
2
1
2
FRONT
SUB
WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO
OUT
AV2
AV1 (RGB) -TV
AV CONNECTOR
AV2
AV1 (RGB) -TV
VCR, etc.
Pioneer component with
Î
mark.
CONTROL
OPT.
AUDIO OUT (2CH)
AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC
PAL
AUTO
OUT
IN
R
2
1
R
L
L
1
2
1
2
FRONT
SUB
WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO
OUT
AV2
AV1 (RGB) -TV
CONTROL
OUT
IN
CONTROL
OUT
CONTROL
OPT.
AUDIO OUT (2CH)
AUDIO OUT (5.1CH)
AC IN
VIDEO OUT
NTSC
PAL
AUTO
OUT
IN
R
2
1
R
L
L
1
2
1
2
FRONT
SUB
WOOFER
CENTER
TV SYSTEM
AV CONNECTOR
DIGITAL OUT
SURROUND
S-VIDEO
OUT
AV2
AV1 (RGB) -TV
AV CONNECTOR
AV2
AV1 (RGB) -TV
TV or
monitor
Note
When the power is off the signal arriving at the
AV2
jack is
passed through to the
AV1 (RGB)-TV
jack.
