33
En
English
ADJUSTING AUDIO AND VIDEO SETTINGS
About source audio output
When the source input mode has been switched between the
[5.1 Channel]
and
[2 Channel]
mode settings using the
[Audio Out]
setting in the Setup screen
Audio 2
menu or by pressing
5.1CH MODE
on the front panel, audio output for
each source will be as shown on the following table.
Setting Your Speaker System for
Multichannel Audio Playback
This player contains a built-in decoder for Dolby Digital
and DTS audio sources as well as 5.1 channel discrete
audio output. Ideally, a 5.1 channel system contains 6
speakers: 2 front speakers, 2 surround speakers, a
center speaker, and a sub woofer. However, as this is
not always the case, accurately setting the
[Speaker
Setting]
setting to reflect your speaker setup allows the
player’s built-in decoder to reroute signals to
compensate for absent speakers.
Make adjustments in the
[Speaker Setting]
setting in
the Setup screen
Audio 2
menu.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set
by the player.
• If you have not made connections to the
AUDIO OUT
(5.1CH)
jacks on the rear panel of the player, it is not
necessary to make any changes to this setting.
1
Use the cursor buttons (
2
/
3
) to select the
speaker.
Every time the
cursor button
is pressed, the
selected speaker changes in the following order.
Audio1
Audio2
General
Language
Video
Speaker Setting
Center
On
–/+
SETUP
Move
Exit
ENTER
Select
Speaker
Return
L
R
SW
LS RS
RETURN
2
Use the cursor button (
∞
) to move the
cursor down to the speaker bar and use
the cursor buttons (
2
/
3
) to select [On] or
[Off] corresponding to whether the
selected speaker is present in your system
or not, respectively.
Notes
• To help identify the speakers being selected, the initials of
the speakers in the speaker system representation on the
right side of the screen will appear in blue.
• When
[On]
is selected for a speaker or pair of speakers,
the icons for those speakers turn yellow in the speaker
system representation on the right side of the screen.
• If
[Off]
is selected for both
[Center Speaker]
and
[Surround Speaker]
,
[Sub-woofer]
is automatically set to
[Off]
.
• When the sub woofer is
[On]
, the low range components
of the center and surround signals will be mixed in the LFE
signal and output from the
SUB WOOFER
jack.
• When the sub woofer is
[Off]
, the low range components
of the center and surround signals will be mixed in the L
and R signals and output from the front speakers.
• Speakers in this menu setting can also be turned on and
off using
CENTER
,
SURROUND
, and
SUB WOOFER
on
the front panel. However, these buttons do not work when
the
“GUI”
indicator is lit.
*1: When the
“VIRTUAL DOLBY DIGITAL”
indicator is lit, PCM output is muted.
*2: When the Setup screen
Audio 1
menu
[DTS Out]
setting is set to
[Off]
, DTS digital output is muted.
*3: When the
5.1CH
mode is selected,
“5.1CH”
indicator is lit.
Audio1
Audio2
General
Language
Video
Speaker Setting
Center
On
–/+
SETUP
Move
Exit
ENTER
Select
Speaker
Return
L
R
SW
LS RS
¥ ¥ ¥
RETURN
AUDIO
CONTENTS
OUTPUT
MODE
AUDIO OUT (2 CH)
5.1 CH
2 CH
5.1 CH
2 CH
5.1 CH /
2 CH
5.1 CH
2 CH
5.1 CH /
2 CH
5.1 CH /
2 CH
DVD
CD
VIDEO CD
Dolby
Digital
Dolby
Digital
Karaoke
LPCM
DTS
Front Lch, Rch
2 ch DOWNMIX Lch, Rch
MUTE
Lch, Rch
Center
Surround Lch, Rch
LFE
2 ch DOWNMIX Lch, Rch
2 ch DOWNMIX Lch, Rch
Lch, Rch
AUDIO OUT (5.1 CH)
DIGITAL OUTPUT (S/PDIF)
Lch, Rch
Front Lch, Rch
L, R
Front L,R
Center
Surround L,R
Sub Woofer
Dolby Digital
3
PCM
d
Dolby Digital
d
Dolby Digital
Lch, Rch
*1
DTS
*2
Center Surround Lch, Rch
LFE
MUTE
Lch, Rch
MUTE
5.1 CH /
2 CH
MPEG
Lch, Rch
Lch, Rch
MPEG
MUTE
MUTE
d
Dolby Digital
Lch, Rch
Lch, Rch
MUTE
MUTE
*3
*3
*3
*3
*3
*3
*3
MUTE
Lch, Rch
MUTE
Center
Sub-woofer
Surround
5
∞
5
∞
∞
5
