Chapter 5: System Maintenance
72
Deko1000 & Deko550 Technical Reference And Service Guide
Select “Edit...” from the “Change Drive Letters and Paths... window.” Refer to
Figure 5-38.
Figure 5-38: Change Drive Letters and Paths window
From the pull down select “E” as the new drive designation to be assigned to Clips and then
click “Ok.” Refer to Figure 5-39.
Figure 5-39: E designation selected for Clips Drive
Select “Yes” to confirm that the drive designation is to be assigned. Refer to Figure 5-40.
Figure 5-40: Confirmation of drive designation
Repeat the process for any remaining partitions that need to be changed. Make sure the
partition designations are the same as those shown in Figure 5-41 below.
Important:
When completed, your designations should match those shown in Figure 5-41.
