Chapter 4: Troubleshooting
Deko1000 & Deko550 Technical Reference And Service Guide
39
3. Select the set of software components that are to be tested.
From the pull down on the bottom part of the Manifest Utility start-up screen, select the set
of software components that are to be selected. Refer to Figure 4-17. The choices are
“Deko1000 or Deko550” and “Inflexion_Manifest.”
• Deko1000 or Deko550 -- This choice will compare the Deko1000 or Deko550 software pro-
grams on the workstation being tested to the official record of the Pinnacle Systems release for
the Deko1000 or Deko550 software.
• Inflexion_Manifest -- This choice will compare the Inflexion software programs on the worksta-
tion being tested to the official record of the Pinnacle Systems release for the Inflexion software.
Figure 4-17: Software components selection for Manifest Utility test
4. Click the “Run Diagnostics” button on the Manifest Utility program window.
Clicking the “Run Diagnostics program will cause the comparison test for the selected
workstation components to be made. For the Deko1000 or Deko550 components, a window
similar to that shown in Figure 4-18 will be displayed.
Figure 4-18: Example results from Manifest Utility program
A window similar to that shown in Figure 4-18 will be displayed if the test is run for the
Inflexion software components.
