Chapter 5: System Maintenance
Deko1000 & Deko550 Technical Reference And Service Guide
71
Select “Change...” from the “Change Drive Letters and Paths... window.” Refer to
Figure 5-34.
Figure 5-34: Change Drive Letters and Paths window
From the pull down select “D” as the new drive designation to be assigned to Graphics and
then click “Ok.” Refer to Figure 5-35.
Figure 5-35: D designation selected for Graphics
Select “Yes” to confirm that the drive designation is to be assigned. Refer to Figure 5-36.
Figure 5-36: Confirmation of drive designation
Right click on the partition word Clips (H:) and select “Change Drive Letters and Paths...”
from the pop-up window. Refer to Figure 5-37.
Figure 5-37: Change Drive Letters and Paths being selected
