Function description
Operating Manual PSEN sg2c-5CCLLE
1004172-EN-02
| 11
[1]
[2]
[3]
[4]
[1]
[2]
Mode of operation
Within the danger zone, if the escape release pin [1] is pressed in the direction of the safety
gate, the cover on the escape release [2] detaches from the locked position and lifts up-
wards. The swivel piece [3] folds downwards. The bolt tongue [4] behind the swivel piece is
released. The safety gate can be opened immediately, enabling the operator to leave the
danger zone.
WARNING!
Loss of safety function due to the incorrect installation of the escape
release!
If the escape release pin is accessible from the outside, the guard locking
device can be released from the outside and the safety gates opened, al-
though the hazardous machine is switched on.
Depending on the application, serious injury or death may result.
The escape release should be installed so that it is only accessible from in-
side the danger zone.
It is also important to refer to the maintenance instructions (see chapter en-
titled Maintenance)
