Wiring
Operating Manual PSEN sg2c-5CCLLE
1004172-EN-02
| 22
5.5
Wiring the connection terminals
Connecting the cables:
}
Use a flat blade screwdriver (DIN 5264-A)!
DIN 5264-A
}
Strip the wire back 7 mm.
}
Insert the screwdriver into the square hole.
}
Insert the stripped wire into the square hole as far as it will go.
}
Pull out the screwdriver.
}
Check that the cable is firmly seated.
5.6
E-STOP pushbutton connection
CAUTION!
With versions with integral E-STOP pushbutton, the E-STOP pushbutton
(terminals X1-10 to X1-13) must be integrated into the plant/machine's E-
STOP concept in accordance with EN/IEC 60204.
