Installation
Operating Manual PSEN sg2c-5CCLLE
1004172-EN-02
| 33
6.2
Initial installation of handle unit
}
Check whether the present bolt tongue is correctly oriented at the handle unit. Standard
is right-hand door hinge at delivery (leave of the door opens to the right).
}
Coat the thread of the ball handle with screw adhesive (e.g. Loctite 2700) and screw
firmly together with the handle unit by hand.
Install bolt tongue with handle unit:
}
Remove the screw blocking the spring-loaded limit stop mechanism (see illustration
"Handle unit and actuator with screw").
}
Position the screwdrivers in the slots provided on the limit stop mechanism (see illustra-
tion "Unlock bolt").
}
Press screwdriver towards the base plate to release the spring-loaded limit stop mechan-
ism.
}
Engage bolt tongue with handle unit in the actuator guide.
}
Ensure by moving backwards and forwards towards the limit stop that the handle unit
cannot be removed from the actuator guide.
}
Re-attach the screw with a torque setting of 2 Nm +/-0.1. Use an appropriate screw ad-
hesive (e.g. Loctite 2700) to protect the screw from working loose.
Fig.: Handle unit and actuator with screw
