Installation
Operating Manual PSEN sg2c-5CCLLE
1004172-EN-02
| 27
6
Installation
}
When installing make sure you comply with the requirements of EN ISO 14119.
}
The safety switch and handle unit with actuator should be installed opposite each other in
parallel.
}
The safety switch and handle unit with actuator should be secured only with socket head
cap screws M5 - DIN EN ISO 4762.
NOTICE
It must not be possible to operate or remove the handle unit from inside the
danger zone. Protect the handle unit from access, e.g. by covers on the
hazard side of the door.
INFORMATION
The handle unit should be protected from unauthorised removal and from
contamination.
CAUTION!
Safety switch and handle unit
– Should not be exposed to heavy shock or vibration
– Should not be used as a limit stop
