Installation
Operating Manual PSEN sg2c-5CCLLE
1004172-EN-02
| 28
6.1
Initial installation of safety switch
}
On swing gates and revolving gates:
– Open the cover for the escape release in the direction of opening and remove it.
– Prepare 9 mm hole for the escape release and attach profile nuts to the aluminium
profile (see also
Dimensions for the drill holes [
37]
).
The escape release does not require a drill hole.
NOTICE
The escape release does not work on sliding gates. The PSEN sg2c may
only be used on sliding gates if the risk analysis shows that nobody can be-
come trapped in the danger zone.
