21
REV
AL 182
Use, maintenance and warning instructions
MEDIUM PRESSURE REGULATOR
|
GENERAL INFORMATION
|
REV. 00
EN
2.10 - QUALIFIED PROFESSIONAL FIGURES
Qualified operators in charge of using and managing the equipment throughout its technical service life:
Professional figure
Definition
Mechanical
maintenance techni
-
cian
Qualified technician able to:
• perform preventive/corrective maintenance operations on all mechanical parts of the
equipment subject to maintenance or repair;
• access all device parts for visual inspection, equipment checks, adjustments and cali-
brations.
The maintenance mechanical technician is not authorised to operate on live electrical sys-
tems (if any).
Electrical
maintenance techni
-
cian
Qualified technician able to:
• perform preventive/corrective maintenance operations on all electrical parts of the de-
vice subject to maintenance or repair;
• read wiring diagrams and check the correct functional cycle;
• perform adjustments and operate on electrical systems for maintenance, repair and
replacement of worn parts.
The electrical maintenance technician can operate in the presence of voltage inside electri-
cal panels, junction boxes, control equipment etc. only if he/she is deemed to be suitable
(S.P.).
For general requirements, refer to the IEC EN 50110-1:2014 standard.
Worker in charge of
transport,
handling,
unloading and place
-
ment on site
Operator qualified to:
• use lifting equipment;
• handle materials and equipment.
The equipment must be lifted and handled strictly in accordance with the instructions pro-
vided by the manufacturer as well as the regulations in force at the place where the equip-
ment is installed.
Installer
Qualified operator able to:
• carry out all the operations necessary to properly install the equipment;
• perform all the operations necessary to safely and properly operate the equipment and
the system.
User’s
technician
Technician trained and authorized to use and manage the equipment for the activities it was
supplied for. They must:
• be able to perform all operations required to properly run the equipment and the sys-
tem, ensuring their own safety and that of any personnel on site;
• have proven experience in properly using the equipment similar to that described in this
instruction manual, and be trained, informed and instructed in this regard.
The technician may carry out maintenance only if authorised/qualified to do so.
Tab. 2.8.
Summary of Contents for REVAL 182
Page 404: ......
