231
ASX 176
Use, maintenance and warning instructions
HIGH PRESSURE REGULATOR
|
MAINTENANCE AND FUNCTIONAL CHECKS
|
REV. 00
EN
Step Action
45
Insert the valve cover (4) so that the spring (12) rests on the lever of the pressure switch.
NOTICE!
Keep the valve cover (4) tilted for easier assembly.
46
Push and tilt the valve cover upwards (4).
47
Insert the valve body (3) together with the stem assembly (5, 6, 7, 8, 9, 10) into the valve cover (4).
NOTICE!
The valve body (3) must be centred with the centring pin (2).
48
Fasten the screws (24) of the valve body (3).
49
Fasten the screws (24) of the valve cover (4).
50
Fit the lever (18).
51
Insert and fix the screws (19).
52
Insert the flange (15) into the cylinder (14).
53
Insert the gasket (16) into the cylinder (14) with the flat side facing upwards.
54
Insert the flange (13) into the cylinder (14).
55
Insert the screws (23).
56
Fit the quick discharge assembly (13, 14, 15, 17) into the valve body (3).
57
Fix the screws (23).
58
Fit the cover (119) together with the gasket (139).
59
Insert and fix the screws (122) of the pressure switch.
Tab. 9.110.
WARNING!
Ensure that all parts have been fitted correctly.
Summary of Contents for ASX 176
Page 32: ...32 ASX 176 EN Use maintenance and warning instructions HIGH PRESSURE REGULATOR SAFETY REV 00 ...
Page 253: ...253 ASX 176 ...
Page 254: ......
