221
ASX 176
Use, maintenance and warning instructions
HIGH PRESSURE REGULATOR
|
MAINTENANCE AND FUNCTIONAL CHECKS
|
REV. 00
EN
Step Action
65
Insert and fix the screws (24.1) according to the following tightening torque:
• R44/SS > tab. 9.86.
NOTICE!
Tighten the screws according to the cross diagram in paragraph 9.4.2.2.
66
Fit the gaskets (19) and the filter (68).
67
Position and secure the nut (13).
68
Fit the piston (59) into the spacer (4).
69
Fit the sleeve (6).
70
Put the bracket (14) back in place.
71
Insert and fix the screws (24) according to the following tightening torque:
• R44/SS > tab. 9.86.
NOTICE!
Tighten the screws according to the cross diagram in paragraph 9.4.2.2.
72
Insert the spring (23) together with the spring supports (7).
NOTICE!
Make sure that the piston pin (59) is inside the spring support (7).
73
Fit and secure the cap (8) to the sleeve (6).
Tab. 9.107.
WARNING!
Ensure that all parts have been fitted correctly.
Summary of Contents for ASX 176
Page 32: ...32 ASX 176 EN Use maintenance and warning instructions HIGH PRESSURE REGULATOR SAFETY REV 00 ...
Page 253: ...253 ASX 176 ...
Page 254: ......
