41
2.
System
►
Setup assistant
:
Check the settings of the following screens and if necessary, adjust
the parameters by clicking on the different values.
3.
Heat sources
Quantity of heat pumps the system contains.
4.
Type selection
By click on the value, it can be specified
which of the existing compressor types
with all their basic settings are to be
loaded. Depending on the selected type,
the parameter settings change in the
subsequent masks.
5.
Heat pump 1: Options
If a circulation pump exists on the heating side, set switch to ON and
if a variable speed pump exists on one side, set responsible switch to
ON as well.
On the following screen,
you can fix the speed controls of the
compressor. Just change values if absolutely necessary.
6.
Heat pump 1: Energy meter
Change values if the listed meters are installed. The choosen
settings are required if PicoEnergy meters are installed. Wrong
values could cause errors.
7.
Heat pump 1: Energy meter
Change values into the displayed, if a PicoEnergy heat meter is
installed. The set value must exactly match with the value that the
external counter has. This value can be taken either from the data
sheet of the counter, or being set on the counter itself.
DX ZHV0212
WPD412
DX ZHV0342
WPD618
Luft WPLT310
WPLT310
Luft WPLT518
WPLT518
Sole WPS26
WPS26
Sole ZHV0212
WPS412
Sole ZHV0342
WPS618
Wasser WPS26
WPS26-W
Wasser ZHV0212
WPS-W412
Wasser ZHV0342
WPS-W618
