40
2.
Press the buttons "-" and "+" o set the desired address. The top semi-circle is used to display
the currently selected address value. The currently specified address value is shown starting
with 0 from the left.
The assignment to the desired heating circuit (HC1, HC2, ...) is determined by the address (0,
1, ...) of theOI 423/A
3.
Save the entered settings by pushing both arrow keys
simultaneously (for three seconds).
The address is now set.
15.3.
Setup assistant
The commissioning of a system using the setup assistant is done by the processing of individual steps.
In the following masks, the steps of device settings and system scheme are shown exemplarily. Are all
steps of the setup assistant processed, the settings entered must be taken by consent. Then the
standard layout appears again. In the delivery condition or respectively during the loading of the
factory settings, no type is loaded by default. However the parameters are set with default values
which
represent
a
heat
generator
with
a
small
heating
power
(<
10
kW).
To start the operation of the heat generating system, proceed as follows:
►
1.
Detail menu:
Put in the Service Technician password. If the Service
Technician user level is active and the operating unit is not
operated for 30 minutes, the system will automatically
reset to the normal user mode.
Icon
Description
Next
, for opening the next settings mask of the setup assistant.
Press it whenever you are not sure which values you have to change.
Previous
, for opening the previous settings mask of the setup assistant.
Cancel
, for cancelling the setup assistant. The settings made are discarded.
Help
, for opening the help system. Press it whenever you need further assistance.
