PI Manufacturing DVR-TVI-04 User Manual Download

Page: 85 / 165

Digital Video Recorder User Manual

8.2

Setting Sensor Alarms

Purpose:

Set up handling method of an external sensor alarm.

Steps:

Enter Alarm Settings of System Configuration and select an alarm input.
Menu> Configuration> Alarm
Select

Alarm Input

tab to enter

Alarm Input Settings

interface.

Figure 8. 5

Alarm Status Interface of System Configuration

Set the handling method of the selected alarm input.

Check the

Enable

checkbox and click

button to set its alarm response actions.

Figure 8. 6

Alarm Input Settings Interface

Select

Trigger Channel

tab and select one or more channels which will start to record or become full-screen

monitoring when an external alarm input is triggered.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and max. eight time periods can be set within each day.

Time periods shall not be repeated or overlapped.

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands