PI Manufacturing DVR-TVI-04 User Manual Download

Page: 73 / 165

Digital Video Recorder User Manual

click the

button to set the full screen as the detection area.

Click

to configure the smart settings.

Figure 6. 10

Smart Settings

Skip the Non-Related Video:

The non-related video will not be played if this function is enabled.

Play Non-Related Video at:

Set the speed to play the non-related video. Max. 8/4/2/1 are selectable.

Play Related Video at:

Set the speed to play the related video. Max. 8/4/2/1 are selectable.

Pre-play and post-play is not available for the motion event type.

Click

to search and play the matched video files.

(Optional) You can click

to filter the searched video files by setting the target characters, including the

gender and age of the human and whether he/she wears glasses.

Figure 6. 11

Set Result Filter

The Result Filter function is supported by the IP camera only.

6.1.6

Playing Back by System Logs

Purpose:

Play back record file(s) associated with channels after searching system logs.

Steps:

Enter

Log Information

interface.

Menu>Maintenance>Log Information

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands