PI Manufacturing DVR-TVI-04 User Manual Download Page 47

Page: 47 / 165

Digital Video Recorder User Manual

Click the button

PTZ

in the lower-right corner of the PTZ setting interface;

Or press the PTZ button on the front panel or click the PTZ Control icon

in the quick setting bar to

enter the PTZ setting menu in live view mode.

Click the

One-touch

tab to show the one-touch function of the PTZ control.

Figure 4. 12

PTZ Panel - One-touch

There are 3 one-touch park types selectable. Click the corresponding button to activate the park action.

Park (Quick Patrol):

The dome starts patrol from the predefined preset 1 to preset 32 in order after the park

time. The undefined preset will be skipped.

Park (Patrol 1):

The dome starts moving according to the predefined patrol 1 path after the park time.

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

The park time can only be set through the speed dome configuration interface. The default value is 5s.

Click the button again to inactivate it.

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands