PI Manufacturing DVR-TVI-04 User Manual Download

Page: 100 / 165

Digital Video Recorder User Manual

9.2

Configuring Overlay Channel

Purpose:

You can assign the POS machine to corresponding channel on which you want to overlay.

Steps:

Enter the POS settings interface.

Menu > Configuration > POS> Overlay Channel

Click to select an analog or IP camera from the camera list on the right, and then click a POS item from the

POS list you want to overlay on the selected camera.

Click

to go to the previous or next page of cameras.

You can also click

to overlay all POS items to the first 8 channels in order. And the

is used to

clear all POS overlay settings.

Click the

Apply

button to save the settings.

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands