PI Manufacturing DVR-TVI-04 User Manual Download

Page: 68 / 165

Digital Video Recorder User Manual

6.1

Playing Back

6.1.1

Instant Playback

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Instant playback by channel

Steps:

Choose a channel in live view mode and click the

In the instant playback mode, only record files recorded during the last five minutes on this channel will be played
back.

Figure 6. 1

6.1.2

Playing Back by Normal Search

Playback by Channel

Enter the Playback interface.

Right click a channel in live view mode and select

Figure 6. 2

Playback by Time

Purpose:

Play back video files recorded in specified time duration. Multi
are supported.

Steps:

Enter

Playback

interface.

Menu>Playback

Digital Video Recorder User Manual

Playing Back Record Files

Instant Playback

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

Choose a channel in live view mode and click the

button in the quick setting toolbar.

In the instant playback mode, only record files recorded during the last five minutes on this channel will be played

Figure 6. 1

Instant Playback Interface

Playing Back by Normal Search

ight click a channel in live view mode and select

Playback

from the menu, as shown in the following figure:

Right-click Menu under Live View

Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.

In the instant playback mode, only record files recorded during the last five minutes on this channel will be played

the following figure:

channel simultaneous playback and channel switch

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands