PI Manufacturing DVR-TVI-04 User Manual Download

Page: 113 / 165

Digital Video Recorder User Manual

112

If you want to export the captured pictures to local storage device, connect the storage device to the device
and click

Export All

to enter the Export interface.

Click

Export

to export all pictures to the storage device.

11.3

Plate Search

Purpose:

You can search and view the matched captured vehicle plate picture and related information according to

the plate searching conditions including the start time/end time, country and plate No..

Steps:

Enter the

Plate Search

interface.

Menu>VCA Search> Plate Search

Select the camera (s) for the plate search.

Specify the start time and end time for searching the matched plate pictures.

Figure 11. 4

Plate Search

Select the country from the drop-down list for searching the location of the vehicle plate.

Input the plate No. in the field for search.

Click

Search

to start searching. The search results of detected vehicle plate pictures are displayed in list or in

chart.

Please refer to the Step7-Step8 of

Section 10.1 Face Search

for the operation of the search results.

11.4

People Counting

Purpose:

The People Counting is used to calculate the number of people entered or left a certain configured area and form in
daily/weekly/monthly/annual reports for analysis.

Steps:

Enter the

People Counting

interface.

Menu>VCA Search> People Counting

Select the camera for the people counting.

Select the report type to Daily Report, Weekly Report, Monthly Report or Annual Report.

Set the statistics time.

Click the

Counting

button to start people counting statistics.

Summary of Contents for DVR-TVI-04






































































































































































Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands

PI Manufacturing DVR-TVI-04, User Manual

Search results

Summary of Contents for DVR-TVI-04

Reviews:

Related manuals for DVR-TVI-04

Brands by name

Popular brands