Phoenix Contact IOL MA8 PN DI8 User Manual Download

Page: 55 / 84

Web manager interface

4022_en_A

PHOENIX CONTACT

In addition to resetting the configuration options to the factory defaults, additional defaults

can be reset by checking the appropriate box.

–

Uploaded IODD files:

Removes any user-loaded IODD files.

–

IO-Link data storage:

Removes saved data from IO-Link devices.

–

Hostname, network settings (DHCP/Static, static IP address, static network

mask, and static IP gateway:

Removes any stored data in the listed fields.

5.3

Device maintenance

5.3.1

Firmware

The IOL MA8 PN DI8 is loaded with the latest firmware at the factory but may require

updated images or application subassemblies to access to the latest features. To view the

image and application versions in the IOL MA8 PN DI8, click the “Device Maintenance” tab,

and then click the “FIRMWARE” subtab.

Figure 5-22

“Firmware” page

Summary of Contents for IOL MA8 PN DI8





















































































Search results

Summary of Contents for IOL MA8 PN DI8

Reviews:

Related manuals for IOL MA8 PN DI8

Brands by name

Popular brands

Phoenix Contact IOL MA8 PN DI8, User Manual

Search results

Summary of Contents for IOL MA8 PN DI8

Reviews:

Related manuals for IOL MA8 PN DI8

Brands by name

Popular brands