Phoenix Contact IOL MA8 PN DI8, User Manual

Page: 47 / 84

Web manager interface
4022_en_A PHOENIX CONTACT
45
5.2.5 OPC UA configuration
Use the “OPC UA Settings” page to configure OPC UA with the IOL MA8 PN DI8.
Edit OPC UA settings
Use this procedure to edit OPC UA settings.
1. If necessary, open the IO-Link web interface with the browser using the IP address.
Click the “Configuration” tab, and then click the “OPC UA” subtab to access the “OPC UA
Settings” page.
Figure 5-13 “OPC UA Settings” page
2. Click the “EDIT” button for the port or ports to configure.
Figure 5-14 Editing a port on the “OPC UA Settings” page
3. Make appropriate selections for the device connected to that port.
4. Click each “EDIT” button and open all ports to quickly configure port parameters. Scroll
over to see all editable parameters.
5. Scroll to the top of the page and click the “SAVE” button.
Make sure that the port now displays the “EDIT” button. If it displays the “SAVE” and
“CANCEL” buttons, that means that one of the parameters contains an incorrect value.
If necessary, scroll down the page, make the needed corrections, and click the “SAVE”
button.
Click the “EDIT” button for all ports to quickly configure all port parameters.