Phoenix Contact IOL MA8 PN DI8, User Manual

Page: 56 / 84

IOL MA8 PN DI8
54
PHOENIX CONTACT 4022_en_A
5.3.1.1 Updating images
The upper portion of the “FIRMWARE” page is used to update the IOL MA8 PN DI8 images.
The lower portion is used to update application subassemblies that are integrated in the
Application Base.
Typically, the latest application subassemblies are available in the Application Base image.
There may times when a feature enhancement is available in an application subassembly
and not yet available in the Application Base image.
Use this procedure to upload images using the “FIRMWARE” page.
1. Download the latest image from phoenixcontact.net/product/1072838 .
2. Open a browser and enter the IP address of the IOL MA8 PN DI8.
3. Click the “Device Maintenance” tab, and then click the “FIRMWARE” subtab.
4. Click the “UPDATE” button next to the image to be updated.
Figure 5-23 Image update
5. Click the “Choose File” button and navigate to the file location using the “Browse”
window. Highlight the image, and click the “Open” button.
6. Click the “Install” button.
7. Click the “CONTINUE” button in the “Update Image” message.
8. When finished, click the “OK” button to close the “Update Image Successful” message.
9. After an image is updated, always click the “REBOOT” button.
5.3.1.2 Updating application subassemblies
Application subassemblies
Application subassemblies are the components of the Application Base image. Application
subassemblies have a version number consisting of four segments (for example, 1.3.18.3).
The first two values in a subassembly version correspond to the version of the application
base assembly for which it was built and tested.
When using the “FIRMWARE” page, an application subassembly can install only if its
version number matches that of the installed application base assembly. A subassembly
with a version of 1.20.2.4 installs only if the application base version is 1.20.2. It will not
install on a device with application base version 1.21.5.
Use this procedure to upload applications using the “FIRMWARE” page.
1. Download the latest application from the phoenixcontact.net/product/1072838 .
2. Open a browser and enter the IP address of the IOL MA8 PN DI8.
3. Click the “Device Maintenance” tab, and then click the “FIRMWARE” subtab.