Phoenix Contact 2702772 User Manual Download Page 42

Page: 42 / 90

GW EIP/ASCII...

PHOENIX CONTACT

3785_en_B

To PLC truncated packet count:

Displays the number of received packets that were

truncated before being sent to the PLC.

TX duplicate sequence errors:

The count is incremented when TX sequence number

checking is enabled, and the GW EIP/ASCII... receives a transmit message with a

sequence number equal to the previous sequence number. It is expected that the

sequence number is incremented for each transmit message.

TX unexpected sequence errors:

This value is incremented when the

GW EIP/ASCII... receives a transmit message with a sequence number that is not equal

to either the previous transmit sequence number or the previous transmit sequence

number plus one. It is expected that the sequence number is incremented for each

transmit message.

“Ethernet Interface” group

TCP connection status:

Displays the IP address and port when a socket is opened.

TX byte count:

The number of bytes transmitted by the GW EIP/ASCII… socket port.

TX packet count:

The number of packets transmitted by the GW EIP/ASCII… socket

port.

RX byte count:

The number of bytes received by the GW EIP/ASCII… socket port.

RX packet count:

The number of packets received by the GW EIP/ASCII… socket

port.

To PLC dropped packet count:

Displays the number of dropped packets that were

intended for the PLC.

To PLC truncated packet count:

Displays the number of received packets that were

truncated before being sent to the PLC.

Rx consumed sequence error count:

The count is incremented when using the

Write-to-Tag-Sync method of receive communication, a serial packet is received, and

the Consumed Sequence number is out of sync. (It is not equal to the Produced

Sequence number or equal to the Produced Sequence number minus one.)

TX duplicate sequence errors:

The count is incremented when TX sequence number

checking is enabled, and the GW EIP/ASCII receives a transmit message with a

sequence number equal to the previous sequence number. It is expected that the

sequence number is incremented for each transmit message.

TX unexpected sequence errors:

This value is incremented when the GW

EIP/ASCII… receives a transmit message with a sequence number that is not equal to

either the previous transmit sequence number or the previous transmit sequence

number plus one. It is expected that the sequence number is incremented for each

transmit message.

If desired, click the “Reset Statistics” button to refresh the statistics shown.

Summary of Contents for 2702772



























































































Search results

Summary of Contents for 2702772

Reviews:

Related manuals for 2702772

Brands by name

Popular brands

Phoenix Contact 2702772, User Manual

Search results

Summary of Contents for 2702772

Reviews:

Related manuals for 2702772

Brands by name

Popular brands