Phoenix Contact 2702772 User Manual Download Page 20

Page: 20 / 90

GW EIP/ASCII...

PHOENIX CONTACT

3785_en_B

3.4

Connecting the power supply

The device can be connected to a single power source or two power sources for

redundancy. The GW EIP/ASCII... is powered using a +24 V DC SELV power supply. The

power supply is connected by way of COMBICON plug-in screw terminal blocks (24 V and

0 V).

Figure 3-4

Single power supply connection

Figure 3-5

Redundant power supply connection

CAUTION:

Incorrect connection may result in damage to equipment and/or serious personal injury.

Only qualified personnel may connect the power, start up, and operate this device.

According to the safety instructions in this text, qualified personnel are persons who are

authorized to start up, to ground, and to mark devices, systems, and equipment according

to the standards of safety technology. In addition, these persons must be familiar with all

warning instructions and maintenance measures in this text.

Disregarding this warning may result in damage to equipment and/or serious personal

injury.

Summary of Contents for 2702772



























































































Search results

Summary of Contents for 2702772

Reviews:

Related manuals for 2702772

Brands by name

Popular brands

Phoenix Contact 2702772, User Manual

Search results

Summary of Contents for 2702772

Reviews:

Related manuals for 2702772

Brands by name

Popular brands