Phoenix Contact 2702772, User Manual

Page: 22 / 90

GW EIP/ASCII...
20
PHOENIX CONTACT 3785_en_B
3. Enter the credentials to access the web server configuration pages. The default
credentials are:
User name: Admin
Default password: admin
4.4 Home screen
Immediately after login, the “Home” screen is displayed. From the “Home” screen, the basic
settings of the GW EIP/ASCII... can be immediately configured by clicking on the
appropriate Ethernet port or serial port in the diagram of the module.
Figure 4-2 “Home” screen
Advanced settings can be accessed through the menu at the top of the screen. The “Home”
screen can be accessed at any time by clicking the “Home” button in the upper-left corner
of the web-based management interface.
Powering multiple devices with factory default IP addresses causes a network conflict, and
incorrect parameters may be set in the GW EIP/ASCII... modules. When programming
modules for the first time, it is important to apply power to only one at a time, and change
the IP address of each module to a unique IP address. Once all devices have a unique IP
address, they can be powered on together while on the same network.