Phoenix Contact 2702772, User Manual

Page: 45 / 90

Configuration and startup
3785_en_B PHOENIX CONTACT
43
Writes to offline Ethernet device on socket X: The number of write attempts by a PLC to
the Ethernet device when the device was offline.
First error description: Text description of the first error that occurred.
Last error description: Text description of the last or most recent error that occurred.
4.9.3 Serial logs
The “Serial Logs” page provides a log of received and transmitted messages on the serial
port. Up to 128 bytes per message and up to 128 messages are logged. This helps with
debugging serial connectivity problems, displaying the proper start and end of transmission
bytes, and diagnosing device problems. Click the “Reset Log” button at any time to clear the
log.
To view serial log statistics:
1. Click the “Diagnostics” tab.
2. Click the “Serial Log” tab.
Figure 4-20 “Serial Log” page
The log format is as follows:
Pkt(N): ddd:hh:mm:ss.mss Rx/Tx>(data)
ddd : days since last system restart
hh : hours since last system restart
mm : minutes since last system restart
ss : seconds since last system restart
mss: milliseconds since last system restart
( data ): Raw/ASCII message data
3. Click the “Reset Log” button to clear the log.