Operation Guide
500ML Lighting Control Console
7 6
Programming
Replacing Fixture(s) from a Group using Group Pool Window
Press and hold the [REC] key and then press the [GROUP] button. s shown in
Figure 124 on page 73
, the Group Pool
window will appear. You may now select the Replace Option in the Record Toolbar (
Figure 132
). Select the Group
you would like to replace in the Pool Window..
Figure 132: Record Toolbar - Replace Option
Note:
You may also hit the [REC] key only, and select the target Group Item in the External Monitors Group Pool
Window.
If you did not select an option from the Record Toolbar, a dialog window asking you what to do will open up
Figure
133
). Click on Replace Group.
Figure 133: Merge or Replace Group? Window
Replacing a Group using the Command Line Interface
Press the [REC] key, followed by the [GROUP] key. You may now select the Replace Option in the Record Toolbar
(
Figure 132
). Enter the number of the group you would like to replace, ie. [1], followed by [ENTER].
Figure 134: Command Line Interface
If you did not select an option from the Record Toolbar, a dialog window asking you what to do will open up (
Figure
133
). Click on Replace Group.
