Operation Guide
500ML Lighting Control Console
5 4
Programming
To do this for multiple fixtures at once, first select the fixtures you would like to change the Pan and Tilt Invert for
and click on Change Options within the Configure Fixtures Screen (
Figure 87
).
Figure 87: Configure Fixtures - Change Pan / Tilt Invert.
The Change Fixture Options screen will open (
Figure 88
).
Figure 88: Change Fixture Options Window
The Change Fixture Options screen consists of multiple dropdown menus, where the default setting of each menu is
"keep". This ensures that only modified values are applied to the fixtures. Select if a fixture's Pan or Tilt should be
inverted or not, and if the selected Fixtures should react to the 500ML console’s grandmaster fader. Select the
appropriate options from the drop down menus and click on OK to finish.
Change DMX Patch
To change the DMX Patch for a single or multiple fixtures at once, select the fixtures you would like to patch and
click on Change Patch within the Configure Fixtures Screen (
Figure 89 on page 55
).
Note:
Programming is not dependent on the patch. This means you may easily program an unpatched fixture, and
you may re-patch or unpatch fixtures at any time without losing any of the fixtures programming.
