Operations Manual
6 4
SET UP FUNCTIONS
3) Select
SOFTKEY D "DelALL"
.
4) Select
SOFTKEY A "Yes"
to delete or
SOFTKEY C "No"
to exit without deleting.
Delete Single DMX Base
You will need to be in DMX Base mode.
To delete a single DMX base:
1) Press
RECORD
.
2) Select the
FX Key
of the show you wish to delete.
3) Select
SOFTKEY C "Delete Base"
.
4) Select
SOFTKEY A "Yes"
to delete or
SOFTKEY C "No"
to exit without deleting.
6. VGA Set
VGA Set is usually used to reset the VGA screen if the VGA card has been removed or if you do not have a VGA
monitor and wish to make the LCD your source of information for channel data, ML and LEDs. This function is on
the third screen of the console’s
Setup
menu.
To access VGA set:
1) Press
MENU
.
2) Press
SOFTKEY D "Next"
two times.
3) Press
SOFTKEY A "VGA Set"
.
4) You have two choices -
Disable VGA
or
Enable VGA
.
a.
Disable VGA
. If you wish to disable the VGA monitor:
1) Press
SOFTKEY A "Exit"
.
2) Turn the console off and then on.
3) The LCD Display will now be your main display device.
b.
Enable VGA
. To enable the VGA monitor:
1) Press
SOFTKEY D "Enter"
this will reboot the console.
2) The VGA display your main display device.
7. ArtNet Setup
Instead of using your DMX connections you can send information from the console over an ArtNet Ethernet network.
To access ArtNet setup:
1) Press
MENU
.
2) Press
SOFTKEY D "Next"
two times.
3) Press
SOFTKEY B "ArtNet Set"
. The LCD display will appear as shown in
Figure 75
.
Figure 75: ArtNet Setup - LCD Display
Menu
Release
DMX Base
FX
A
B
C
D
OpPoll
Exit
PL: 01 S000 T000
Art Net
View Device
ArtNet
ConFig
