manualshive.com logo in svg

Philips 64331, Operation Manual, Page: 19 / 76

Share
Download
Philips 64331 Operation Manual Download Page 19

Single Scene Operation

17

200 Plus Series Console

Example:

1) Press the 

NEXT

 button to select the crossfade mode for single scene operation.

2) Make sure that the 

PRESET A MASTER

 and 

PRESET B MASTER

 faders are at the top.

3) Set the faders 1, 2, 3, 22, 23 and 24 to 100%. (as you move these faders to 100% you will see the intensities 

of these channels come on)

4) Press the

 A STORE

 button. It will turn red.

5) Reset the faders so 10, 11, 12, 19, 20 and 21 are at 100%. You will see no change in these channels 

intensities in real time.

6) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the bottom.

7) The 

A STORE 

button will flash. 

8) Press the 

B STORE

 button it will turn red. The A STORE button will stop flashing.

9) Reset the faders so 5, 6, 7, 13, 14 and 15 are at 100%. 

10) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the top.

11) The 

B STORE

 button will flash.

Congratulations! You have run three cues in Single Scene Mode.

When cross fade occurs the 

A STORE

 button will continue to flash until a scene is stored in the 

B STORE

 button.

This means a scene can be reused.

Example:

1) Press the 

NEXT

 button to select the crossfade mode for single scene operation.

2) Make sure that the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 are at the top.

3) Set the faders 1, 2, 3, 22, 23 and 24 to 100%. (as you move these faders to 100% you will see the intensities 

of these channels come on)

4) Press the 

A STORE

 button. It will turn red.

5) Reset the faders so 10, 11, 12, 19, 20 and 21 are at 100%. You will see no change in these channels 

intensities in real time.

6) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the bottom. Channels 10, 11, 12, 

19, 20 and 21 will be outputting at 100%.

7) The 

A STORE

 button will flash. 

8) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the top.

9) Channels 1,2,3,22,23 and 24 will be outputting at 100%. The A STORE button will continue to flash.

10) Reset channels 7,8,9,14,15 and 16 to 100%.

11) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the bottom. Channels will be 

7,8,9,14,15 and 16 outputting at 100%.

12) The 

A STORE

 button will flash.

13) Press the 

B STORE

 button. It will turn red. The 

A STORE

 button will stop flashing

14) Reset channels 10, 11, 12, 20, 21 and 22 to 100%.

15) Move the 

PRESET A MASTER 

and

 PRESET B MASTER FADERS

 to the top. Channels 11, 12, 20, 21 

and 22 to 100% will be outputting. The 

B STORE

 button will flash.

Timed Fades

It is possible to set a fade time between scenes by using the 

STEP RATE

 fader. Make sure the 

FD/ST TIME

 button

is red by pressing the button as needed. When red, this indicates that the 

STEP RATE

 fader is in time mode. To apply

the time press the A and C soft buttons on the right of the LCD, the text will invert its colors to show the selection has
occurred. This will apply the time on the 

STEP RATE FADER

 to the 

PRESET A

 and 

PRESET B

 faders. Set the

time to the desired level. When you move the 

PRESET A

 and 

PRESET B

 faders the time will now be applied to the

transition. The LCD will show the time in the bottom Left window.

Summary of Contents for 64331













































































Reviews:

No comments