Phcbi MCO-50ML Page 67 Operating Instructions Manual Download

Page: 67 / 104

ALARM PARAMETERS

Setting door alarm delay

This function delays the activation of the door alarm for the preset amount of time.



Settable range: 1 – 30 minutes



Factory setting: 2 minutes

1. On the home screen, press the menu key (MENU/HOME).

▶

The left side of the display changes to the Menu screen.

2. On the Menu screen, move the cursor to Alarms & Controls [Fig. 1]
using the up/down keys (

△▽

), and press the enter key (ENTER).

▶

The display changes to the Alarms & Controls screen.

3. On the Alarms & Controls screen, move the cursor to Other Alarm Set
[Fig. 2] using the up/down keys (

△▽

), and press the enter key (ENTER).

▶

The display changes to the Other Alarm Set screen.

4. When the cursor in the Other Alarm Set screen is on Door Alarm
Delay [Fig. 3], press the enter key (ENTER).

▶

The right side of the display changes to the Door Alarm Delay screen,

and the current setting value (02) is displayed

[Fig. 4].

5. Move the cursor using the left/right keys (

◁▷

) and select the digit you

want to change, and then use the up/down keys (

△▽

) to change the

number.

6. Press the enter key (ENTER).

▶

The value is confirmed and the display returns to the Other Alarm Set

screen.

*If the entered setting value is out of the settable range, the following
message is displayed on the right side of the display. Press any key on
the control panel to change to the

Door Alarm Delay

screen [Fig. 4].

7. Press the menu key (MENU/HOME) to display the home screen.



The display returns to the home screen automatically when 90 seconds has passed without any key

operation.

Note:

When the incubator is recovered from the alarm state within the set door alarm delay time, the

buzzer doesn’t sound after the elapse of the set door alarm delay time.

<Left side of the display> [Fig. 3]

Other Alarm Set
Door Alarm Delay
Ring Back Delay
Remote Alarm

Door Alarm Delay

min

1min – 30min

<Right side of the display> [Fig. 4]

<Left side of the display> [Fig. 1]

Menu
      Set Value
      Data Log
      Lock
Alarms & Controls

Door Alarm Delay

Invalid Value

Press Any Key

1min – 30min

<Left side of the display> [Fig. 2]

Alarms & Controls
Temp/Gas Alarm Set
Other Alarm Set
UV Setting
Gas Supply Setting
Date & Time
Keypad Click Set

▼

Summary of Contents for MCO-50ML









































































































Search results

Summary of Contents for MCO-50ML

Reviews:

Related manuals for MCO-50ML

Brands by name

Popular brands

Phcbi MCO-50ML, Operating Instructions Manual

Search results

Summary of Contents for MCO-50ML

Reviews:

Related manuals for MCO-50ML

Brands by name

Popular brands