Phcbi MCO-50ML Page 29 Operating Instructions Manual Download

Page: 29 / 104

CORRECT OPERATION

Use the following procedure to start trial operation or actual operation of the incubator.

Install the incubator correctly, referring to pages 16–21.

Remove the packing materials from the chamber and inner attachments. Then, clean and disinfect the

chamber and all the inner attachments, referring to page 22.

Add approximately 1.5 L of sterile distilled water to the humidifying pan (refer to page 26).

Connect the removable power supply cord to the port on the lower right side.

Note:

Two removable power supply cords for UK and for EU countries are included with this product.

For UK

For EU countries

Connect the removable power supply cord to the outlet.

Turn ON the power switch on the lower right side of the incubator.

Attach the power supply cord cover plate, and then fix the switch cover.

Note:

Use the power supply cord included with this product. Do not use other power supply cords. The

included removable power supply cords are only for this product. Never use them for any other products.

Summary of Contents for MCO-50ML









































































































Search results

Summary of Contents for MCO-50ML

Reviews:

Related manuals for MCO-50ML

Brands by name

Popular brands

Phcbi MCO-50ML, Operating Instructions Manual

Search results

Summary of Contents for MCO-50ML

Reviews:

Related manuals for MCO-50ML

Brands by name

Popular brands