Phcbi MCO-50ML, Operating Instructions Manual, Page: 33 / 104

33
MENU SCREEN
Following shows the screen display and function at each screen under Menu level.
Note: The unit will return from setting mode to the home screen automatically after 90 seconds if no key is
operated (auto-return function). In this case, the setting is not changed.
Screen Function
Page
Set Value screen
Temperature (Setting) chamber temperature
34
CO
2
ON/OFF (Setting) CO
2
gas control mode
35
CO
2
Setting (Setting) CO
2
density
36
O
2
ON/OFF (Setting) O
2
gas control mode
37
O
2
Setting (Setting) O
2
density
38
Overtemp (Setting) high limit temperature alarm
39
Data Log screen
Data Log Chart (Display) operation log graph (can be exported)
42
–
44
Data Log Export (Export) operation log
45
–
46
Data Log Setting (Setting) log interval, Unique ID
47
–
48
Alarm (Display) alarm log
49
Alarm Export (Export) alarm log
50
–
51
Lock screen
Keypad Lock (Setting) Key lock ON/OFF, password
52
–
53
Door Lock * 1 (Setting) Door lock ON/OFF, password
54
–
60
Alarms & Controls screen
Temp/Gas Alarm Set screen
Temp Alarm (Setting) temperature alarm
61
Temp Alarm Delay (Setting) temperature alarm delay
62
CO
2
Alarm (Setting) CO
2
density alarm
63
CO
2
Alarm Delay (Setting) CO
2
density alarm delay
64
O
2
Alarm (Setting) O
2
density alarm
65
O
2
Alarm Delay (Setting) O
2
density alarm delay
66
Other Alarm Set screen
Door Alarm Delay (Setting) door alarm delay
67
Ring Back Delay (Setting) ring back delay
68
Remote Alarm (Setting) remote alarm
69
UV Setting
* 2
UV Lighting Time (Setting) UV lamp ON period
71
UV Life Counter (Display) UV lamp life indication
72
Auto-Extended Time (Display) Automatic extension of UV lamp ON period
73
UV 24h Mode Start (Setting) Lighting UV lamp for 24 hours
74
Gas Supply Setting
CO
2
Supply
* 3
(Setting) Manual CO
2
gas supply line A/B switching
77
N
2
/O
2
Supply (Setting) Manual N
2
/O
2
gas supply line A/B switching
41
Date & Time screen
Date Format (Setting) date display format
78
Date (Setting) date
79
Time (Setting) time
80
Keypad Click Set screen
Keypad Click Set (Setting) keypad clicking sound
81
DAQ Setting screen
* 4
Don’t push (Only for MTR-5000 user)
―
Calibration screen
*
5
Don’t push (Qualified engineer only) ―
*1: When an optional Electric lock MCO-170EL is installed.
*2: When an optional UV system set MCO-170UVS is installed.
*3: When an optional gas auto changer MCO-50GC is installed.
*4: Only when using an optional software product Data acquisition system MTR-5000.
*5: Service key is not available. (Qualified engineer only)