58 . Spectrum RX I Getting Started Guide
6.
Adjust the screw until the energy bar on the screen is at the maximum
obtainable.
NOTE:
The adjustment is sensitive. The energy should reach the maximum
within one quarter-turn of the key.
7.
Insert the hexagonal wrench in the hole on the right, also at 6°. The
wrench goes down farther into this opening than into the other.
8.
Adjust this screw also, to give maximum energy.
9.
Repeat steps 5 through 8 until you are sure that the energy throughput is
maximized.
NOTE:
Typically, the maximum energy will be between 90 and 120 units. It
should take about three repeats of steps 5 through 8 to achieve an
alignment to within 1 unit of the maximum observed value.
10.
Refit the inserts in the holes by pressing down and twisting them into
position.
11.
Press
STOP
.
Ready For Next Command returns.
