34 . Spectrum RX I Getting Started Guide
Figure 14 The Installation screen
5.
If the Installation screen is not displayed, make sure that:
•
the power supply to both the Spectrum RX I and the screen is properly
connected.
•
the brightness and contrast controls on the front of the screen are set
appropriately.
6.
If the Installation screen is still not displayed, see
Contacting PerkinElmer
on page 43.
7.
Adjust the screen display so it is centred on the screen. Refer to the
manual supplied with the screen if there are any problems.
8.
Position the screen unit such that the pointers on the soft key labels are
aligned with the soft keys on the Spectrum RX I.
NOTE:
To help align the screen unit with the soft keys, press
and
move the screen unit such that the center (method) soft key label is
aligned with the center soft key. Press
EXIT
to return to the Installation
screen. An example of the alignment of soft keys and soft key labels is
shown in Figure 14.
