Spectrum RX I Getting Started Guide . 27
2.
To open the box, snap out the right-hand side-panel.
3.
Remove the old desiccant bags and discard them. Take care not to
damage the pressure-relief tube that lies between the middle two bags
(Figure 7).
NOTE:
Do not attempt to dry the bags of desiccant for re-use. The
temperature needed to dry them will destroy the bag.
4.
Open a new desiccant pack and carefully insert the two bags of desiccant
between the pressure-relief tube and the side panel of the box.
5.
Reposition the pressure-relief tube so it is flat against the desiccant bags.
6.
Open another new desiccant pack and insert the two bags of desiccant at
the other side of the tube.
7.
Snap the right-hand side-panel back onto the box.
8.
Lower the box into the Spectrum RX I.
9.
Tighten the screws on the top of the desiccant box.
Locating the Interfe ometer Adjustment Screws
r
During the installation procedure, you adjust the interferometer by turning the
adjustment screws located under the clear plastic purge cover. Because the
main cover of the Spectrum RX I will be closed when you adjust the
interferometer, we suggest you familiarize yourself with the location and feel of
the adjustment screws while you have the main cover of the Spectrum RX I
open:
The adjustment screws are accessed through small slits in the two septum
covers in the clear plastic purge cover (Figure 8).
