manualshive.com logo in svg

Perkin-Elmer TITAN MPS, User Manual

Share
Download
Perkin-Elmer TITAN MPS User Manual Download Page 84

74

Operation

Figure 5-17.

The Replace Favorite screen

Editing a Method

Only methods that appear on the Favorites list can be edited. Follow the 
instructions on Editing the Favorites List on page 73 to find and place the 
appropriate method onto the Favorites list. 

Editing and saving a method from the Favorites list replaces and overwrites the 
method on the Favorites list and in the system memory. 
 

1. To edit a method highlight the method on the Favorites list to edit and then 

press the 

Edit

 button. This will bring up the 

Edit Method 

screen.

Caution

Methods that are overwritten are permanently changed.

 When making 

large changes to a method it is advisable to first place a blank 

user 

method 

onto the Favorites list and then edit the 

user

 method. This preserves the 

original method for reversion should this be necessary 

Summary of Contents for TITAN MPS


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands