manualshive.com logo in svg

Perkin-Elmer TITAN MPS, User Manual

Share
Download
Perkin-Elmer TITAN MPS User Manual Download Page 32

22

Safety Practices

Warranty/Limitation of Warranty

Limited Warranty 

Each product manufactured by Perkin Elmer Inc. is warranted to conform to Perkin 
Elmer Inc. applicable specifications on the date on shipment. The warranty period 
is twelve (12) months after the date of delivery, unless another period is specified. 
The warranty does not extend to damages due to improper installation, improper 
maintenance, abuse, accident, negligence, alteration, misuse, ordinary wear and 
tear, or the like. Claims for replacement of parts caused by ordinary wear and tear 
are excluded, as are claims for replacement of parts meant to be expended during 
the operation of the equipment. 

Perkin Elmer Inc. also includes its digestion vessels under this warranty.

However, high temperatures >280 °C (>536°F), such as may briefly occur when 
exothermic reactions take place can result in irreversible damage to the TFM 
vessels. Since such scorching can only be avoided by proper sample and reagent 
selection by the operator and not by a reliance on the Titan MPS's microwave 
power regulation, damage of this kind is excluded from the warranty! Care must 
also be taken when handling ceramic inserts as their reliability can be seriously 
impaired by even minor damage to their surfaces. Therefore, glass and ceramic 
components are also excluded from this warranty!

Summary of Contents for TITAN MPS


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands