manualshive.com logo in svg

Perkin-Elmer TITAN MPS, User Manual

Share
Download
Perkin-Elmer TITAN MPS User Manual Download Page 36

26

Preparing Your Laboratory

Microwave Radiation

 

The unit employs high voltage and generates microwave radiation!

The Titan MPS must always be carefully connected to a grounded 
conductor. Provided the wall outlet used is equipped with a ground 
connection, the supplied power cord will ensure proper connection. If it 
is necessary to use an extension cord to connect the system to the power 
supply, only a three-wire cord with a ground connection may be 
employed. The unit should not be set up near any devices which are 
sensitive to electromagnetic radiation. If necessary, a warning sign or 
label indicating 

Caution, Microwave Emissions

 should be applied or 

attached to the unit. Should there be any suspicion or indication of 
increased levels of microwave radiation, please immediately inform 
PerkinElmer your PerkinElmer Representative and stop using the 
instrument immediately. 

Repair and servicing of the instrument may only be performed by 
trained personnel.

Warning

Prohibited for persons with heart pacemakers!

The microwave device must not be operated by persons with heart 
pacemakers.

!

Warning

Summary of Contents for TITAN MPS


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands