Perkin-Elmer TITAN MPS, User Manual

Page: 76 / 161

66
Operation
Figure 5-9. The Digestion Review screen
7. Review the method and place the samples in the oven
8. On the Digestion Review screen review all the digestion method parameters to
ensure that everything is correct. You can rename the datafile or choose a
different datafile by pressing the gray button that shows the current datafile
name. For additional details please refer to Selecting Datafiles on page 79.
9. If fewer than 16 samples were prepared (or fewer than 8 samples for the High
Pressure 8-vessel configuration), press the gray vessels button and enter the
number of sample prepared. An information screen will popup showing where
the samples should be placed in the turntable for the best results. These sample
locations can also be used as a reference for Sample Details data entry.
Note
If logged in as an Administrator, the Digestion Review screen allows
editing of the method parameters for this single digestion. Any changes
will not be saved to the method, but will be recorded in the digestion data.
This is useful for method development where many small changes to the
method may be needed and the creation and saving of multiple versions of
the method is not needed.