manualshive.com logo in svg

Perkin-Elmer TITAN MPS, User Manual

Share
Download
Perkin-Elmer TITAN MPS User Manual Download Page 19

9

Precautions

All pressure vessels are equipped with a sealed connection to a gas collection 
system which, in turn, must be connected to an exhaust system via PFA tubing. The 
PFA tubing is connected to the screw-on connection located in the center of the top 
of the microwave. Any hot acid vapors released when the rupture disc activates are 
safely removed through this PFA vent tubing.

Temperature Control

The system is equipped with Direct Temperature Control (DTC) of all sample 
temperatures as described in the section, 

Temperature Monitoring on page 33

. An 

emergency shut-off occurs in case of a rupture disc break.

Pressure Control

The system is also equipped with a pressure monitoring system for a reference 
vessel located at position one as described in the 

Repairs/Customer Service on 

page 107

.

Over Temperature Protection

For safety reasons, the microwave automatically switches itself off in case the 
magnetron, the microwave oven, or the high voltage transformer overheats.

Precautions

 

Be sure to read and understand the precautions listed below. It is also 
recommended to post a copy of the precautions near or on the instrument 
shelf. 

Caution

The protection provided by this instrument may be impaired if the 
instrument is used in a manner not specified by PerkinElmer. 

!

Warning

Summary of Contents for TITAN MPS


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands